6EP1333-4BA00 SIMATIC S7-1500 PM1507 power supply ยี่ห้อ ซีเมนต์

6,700.00฿

6EP1333-4BA00 SIMATIC PM 1507 24 V/8 A Regulated power supply(โมดูล พาวเวอร์ซัพพลาย) for SIMATIC S7-1500 input(AC): 120/230V, output(DC): 24V/8A

The design and functionality of the SIMATIC PM 1507 single-phase load power supply (PM = power module) with automatic range selection of the input voltage makes it an optimal match to the SIMATIC S7-1500 PLC. It supplies the S7-1500 system components such as CPU, system power supply (PS), I/O circuits of the input and output modules and, if necessary, the sensors and actuators with 24 V DC.

Design

  • The load current supplies are directly fastened to the S7-1500 mounting rail (without connection to the backplane bus) and can be mounted directly to the left of the CPU (no installation clearance required)
  • Diagnostics LEDs to indicate status and faults: Operation, Fault, Stand-by
  • ON/OFF switches (operation/stand-by) in case of swapping modules
  • Mains connection plug with touch protection and strain relief for connection of input voltage (enables permanent wiring)
  • Plug-in 24 V DC output terminal with reverse polarity protection for connection of 24 V loads (enables permanent wiring)

Function

  • Connection to all 1-phase 50/60 Hz networks (120 / 230 V AC) through automatic range switching
  • Short-term mains buffering
  • Output voltage of 24 V DC that is limited to maximum 28 V DC (prevents any damages in 24 V loads if input voltage is too high)
  • 50% “Extra Power” for 5 seconds per minute for short-term overloads, for example, when switching on 24V consumers

6EP13334BA00_datasheet_en

หมวดหมู่: ป้ายกำกับ: , ,

รายละเอียดเพิ่มเติม

6EP1333-4BA00 SIMATIC PM 1507 24 V/8 A Regulated power supply(โมดูล พาวเวอร์ซัพพลาย) for SIMATIC S7-1500 input(AC): 120/230V, output(DC): 24V/8A

The design and functionality of the SIMATIC PM 1507 single-phase load power supply 6EP1333-4BA00 (PM = power module) with automatic range selection of the input voltage makes it an optimal match to the SIMATIC S7-1500 PLC. It supplies the S7-1500 system components such as CPU, system power supply (PS), I/O circuits of the input and output modules and, if necessary, the sensors and actuators with 24 V DC.

Design

  • The load current supplies are directly fastened to the S7-1500 mounting rail (without connection to the backplane bus) and can be mounted directly to the left of the CPU (no installation clearance required)
  • Diagnostics LEDs to indicate status and faults: Operation, Fault, Stand-by
  • ON/OFF switches (operation/stand-by) in case of swapping modules
  • Mains connection plug with touch protection and strain relief for connection of input voltage (enables permanent wiring)
  • Plug-in 24 V DC output terminal with reverse polarity protection for connection of 24 V loads (enables permanent wiring)

Function

  • Connection to all 1-phase 50/60 Hz networks (120 / 230 V AC) through automatic range switching
  • Short-term mains buffering
  • Output voltage of 24 V DC that is limited to maximum 28 V DC (prevents any damages in 24 V loads if input voltage is too high)
  • 50% “Extra Power” for 5 seconds per minute for short-term overloads, for example, when switching on 24V consumers

6EP1333-4BA00 datasheet_en

ข้อมูลเพิ่มเติม

น้ำหนัก 0.736 kg
ขนาด 13.50 × 15.50 × 8.50 cm
Scroll to Top